KS 4000iEG S

The generator runs on both gasoline and liquefied gas (propane-butane) and includes everything necessary for using LPG as fuel: a hosepipe with reducer, which provides a reliable connection of a gas cylinder. Just connect the generator to the gas cylinder and start the engine.

You can use generator with both a portable gas cylinder and with a stationary capacity for gas storage (gasholder). Connection has to be made by a certified specialist. The pressure in the supply system must not exceed 16 Bar.

Thanks to a special protective housing, which provides a minimum noise level of 66 dB, the operation of the device will be as comfortable as possible and will not disturb others.

The ergonomic control panel is equipped with a fuel economy mode switch. This mode reduces fuel consumption by up to 50% at small loads due to lower engine revolutions.

The Könner & Söhnen reliable engine is characterized by increased durability, long and stable operation, and meets all European quality standards, including EURO V.

Ergonomic control panel is equipped with LED display, two USB ports 5 V/1 A, 5 V/2.1 A, typical 12 V car socket, ECONOMY MODE switch, operating status indicators, generator parallel connection output for double power receiving as well as RESET button for resetting the control system (upon tripping of the circuit breaker) and restoring power supply.

Könner & Söhnen inverter generators are equipped with a robust brushless alternator with 100% copper winding. The high-end compact permanent magnet alternator is housed in a plastic casing and can withstand maximum loads without any damage to ensure long-term and reliable operation of the generator set.

KS PU1 generator parallel unit from Könner & Söhnen® allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained. It is suitable for all Könner & Söhnen® inverter generators which are parallel ready: KS 2000i S, KS 2000iG S, KS 4000iE S, KS 4000iEG S, KS 4100iEG, KS 6000iE S

Könner & Söhnen Inverter generators are equipped with a transport system for easy movement. Two wheels and a handle that lifts when the generator is moved ensure comfortable transportation and mobility.

Generator is equipped with additional accessories: spark plug wrench, hosepipe with pressure reducer, PH2 screwdriver 6.0 mm.